Sponsored By
In order to access the main site please visit www.havenbuilders.com and log in. If you have not yet joined, you may do so at www.havenbuilders.com. Membership stands at 50 members as of January 6, 2007. Use of this Forum will continue to be absolutely free to all, members as well as non members. All that is necessary is to register:
IMPORTANT!
Builders and owners please submit photos of completed boats, as well as
works in progress. Email to: info@havenbuilders.com or mail to 1747 Littlestone
Rd.; Grosse Pointe Woods, MI, 48236.
Please
note that advertisements and solicitations are inappropriate on this BB.
Posts: 62 IP: Logged Posts: 495 . Tom IP: Logged Posts: 495 Tried my hand at making the gaff jaws. Steam bent an oak board first. Then cut out two halves Glued and riveted to the gaff The middle rivet holds the tang and lets it swivel. Waiting for a 6” rod to do the last rivet. Holes drilled along side the foremost rivet are for lacing the sail. Leather will finish it off later Picture of the mast cone if anyone is considering it IP: Logged Posts: 262 IP: Logged Posts: 62 IP: Logged All times are ET (US)
Return to Haven
Builders Web Site
Click
here to REGISTER, it's easy!
Haven Builders/Rozinante/Alpha II Forum
Haven Forum
Rigging Photos?
profile | register | preferences | faq | search
UBBFriend: Email This Page to Someone!
next newest topic | next oldest topic
Author
Topic: Rigging Photos?
Steve Martinson
Builder
Registered: Jan 2002
posted 04-08-2007 10:25 AM
Now that spring is here, could the members please take a few moments to take photos of their rigging while their boats are being set up? I would appreciate any and all photos of standing and running rigging that you may have. Thank you all, Steve
Admin5
Webmaster
Registered:
posted 04-09-2007 07:36 PM
Here's a beginning:
There is a real need for additional photos showing detail particularly for gaff rig details. Email photos to info@havenbuilders.com and I will post them on this thread.
Admin5
Webmaster
Registered:
posted 04-16-2007 12:52 PM
Posted for Brent Cummings:
.......................................
.......................................
.......................................
.......................................
Tom
Builder
Registered: Jul 2002
posted 04-18-2007 01:25 PM
Here's a link to a WB thread on making gaff jaws:
http://www.woodenboatvb.com/vbulletin/upload/showthread.php?t=64144
Steve Martinson
Builder
Registered: Jan 2002
posted 04-28-2007 12:15 PM
Any further photos of the spars, hardware and lines layout for a marconi rig would be greatly appreciated. I am also interested in anyone's inovations as well. Thanks, Stevenext newest topic | next oldest topic
Contact Us | Haven Builders Web Site
Ultimate Bulletin Board 5.47a
BR>