Sponsored By
In order to access the main site please visit www.havenbuilders.com and log in. If you have not yet joined, you may do so at www.havenbuilders.com. Membership stands at 50 members as of January 6, 2007. Use of this Forum will continue to be absolutely free to all, members as well as non members. All that is necessary is to register:
IMPORTANT!
Builders and owners please submit photos of completed boats, as well as
works in progress. Email to: info@havenbuilders.com or mail to 1747 Littlestone
Rd.; Grosse Pointe Woods, MI, 48236.
Please
note that advertisements and solicitations are inappropriate on this BB.
Posts: 62 IP: Logged Posts: 87 You should drill a 3/8" or slightly larger hole to be able to take the standard 3/8" pin on the authentic Herreshoff turnbuckles. Roger W. IP: Logged Posts: 62 IP: Logged All times are ET (US)
Return to Haven
Builders Web Site
Click
here to REGISTER, it's easy!
Haven Builders/Rozinante/Alpha II Forum
Haven Forum
chain plates
profile | register | preferences | faq | search
UBBFriend: Email This Page to Someone!
next newest topic | next oldest topic
Author
Topic: chain plates
Steve Martinson
Builder
Registered: Jan 2002
posted 10-15-2006 06:56 PM
This may be a silly question, but what size hole do I drill in the ends of the chain plates?
Bristol Bronze
Builder
Registered: Mar 2002
posted 10-18-2006 07:04 PM
Dear Steve,
Bristol Bronze
401-625-5224
Steve Martinson
Builder
Registered: Jan 2002
posted 10-20-2006 07:10 PM
Thanks for the info Rogernext newest topic | next oldest topic
Contact Us | Haven Builders Web Site
Ultimate Bulletin Board 5.47a
BR>