Sponsored By
In order to access the main site please visit www.havenbuilders.com and log in. If you have not yet joined, you may do so at www.havenbuilders.com. Membership stands at 50 members as of January 6, 2007. Use of this Forum will continue to be absolutely free to all, members as well as non members. All that is necessary is to register:
IMPORTANT!
Builders and owners please submit photos of completed boats, as well as
works in progress. Email to: info@havenbuilders.com or mail to 1747 Littlestone
Rd.; Grosse Pointe Woods, MI, 48236.
Please
note that advertisements and solicitations are inappropriate on this BB.
Posts: 1 IP: Logged Posts: 495 There is also considerable information in the Members section on each method of planking. IP: Logged All times are ET (US)
Return to Haven
Builders Web Site
Click
here to REGISTER, it's easy!
Haven Builders/Rozinante/Alpha II Forum
Haven Forum
Mold differences for different hull types?
profile | register | preferences | faq | search
UBBFriend: Email This Page to Someone!
next newest topic | next oldest topic
Author
Topic: Mold differences for different hull types?
essaunders
Valued Junior Member
Registered: Oct 2006
posted 10-06-2006 01:13 PM
Hi.
I'm interested in anyone can tell me if the molds for a Haven are sized differently depending on if the hull is planked, stripped, or coldmoled, (or even clinker?)? Can molds previously used on a planked hull be used for strip or cold molding?
Sorry if this is a basic question: I just haven't found the answer anywhere yet.
Thanks
Admin5
Webmaster
Registered:
posted 10-10-2006 12:35 PM
You can use the Search function to search this Forum:
http://www.kerchevalave.com/cgi-bin/ubbcgi/search.cgi?action=intro&default=7 next newest topic | next oldest topic
Contact Us | Haven Builders Web Site
Ultimate Bulletin Board 5.47a
BR>